Tuesday 15 October 2024
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET
  • ALLOY C-22 DATA SHEET

 

Alloy

UNS Number

Alloy C-22

UNS N06022

 

GENERAL PROPERTIES

A Nickel-Chromium-Molybdenum alloy with better overall resistance and versatility than any other NiCrMo available. It has excellent resistance to localised corrosion and to a variety of mixed industrial chemicals.

Alloy C-22 is also known as Nicrofer 5621, Superimphy C22, and Inconel 622.

 

RESISTANCE TO CORROSION

Alloy C-22 is a versatile nickel-chromium-molybdenum alloy with better overall corrosion resistance than other Ni-Cr-Mo alloys available today, including Alloy C-276, C-4, and A625. Alloy C-22 has outstanding resistance to pitting, crevice corrosion and stress-corrosion cracking. It has excellent resistance to oxidizing aqueous media including acids with oxidizing agents, wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Alloy C-22 has outstanding resistance to both reducing and oxidizing media, and because of its versatility can be used where "upset" conditions are likely to occur or in multipurpose plants.

Alloy C-22 has exceptional resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions.

Alloy C-22 resists the formation of grain boundary precipitates in the weld heat affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

 

PHYSICAL PROPERTIES

Melting Point

(°C)

Density

Modulus of Elasticity
in Tension

 480 – 570

  8.69g/cm3

206 GPa

 

MECHANICAL PROPERTIES

Alloy

Tensile Strength
Minimum
(psi)

Yield Strength
Minimum 0.2% offset

(psi)

% Elongation
in 2" Minimum

       

C-22

Annealed

116,000

59,000

57

 

CHEMICAL PROPERTIES

Alloy

C

Mn

Cr

Fe

Si

S

Mo

Co

V

W

C-22

0.01

0.5

20.0-22.5

2.0-6.0

0.08

0.01

12.5-14.5

2.5

0.35

2.5-3.5

 

WORKABILITY

Alloy C-22 can be fabricated using the same techniques as are used for alloys C-276 or C-4. It can be welded, forged, hot-upset and impact extruded. Alloy C-22 can also be successfully deep-drawn, spun, press formed or punched, although the alloy tends to work-harden.

Parts which have been hot formed or severely cold formed should be heat treated at 1121°C (2050°F) and rapid quenched prior to final fabrication or installation.

 

Contact Us

 

contact phoneT: + 44 (0)1902 409316
Fusion House
The Crescent
Willenhall
West Midlands
WV13 2QR

E: [email protected]